Author: Site Editor Publish Time: 2021-04-27 Origin: Site
The honeycomb die cutting machine uses steel knives, hardware molds, and steel wires to apply a certain pressure through the imprinting plate to roll and cut the printed product or cardboard into a certain shape. When using the honeycomb die cutting machine, pay attention to the operating rules to avoid occurrences.
This is the content list:
Regarding the operating specifications of the honeycomb die cutting machine
What should be paid attention to when operating the honeycomb die cutting machine?
Possible failures and solutions when operating the honeycomb die cutting machine
1. Rotate the drive shaft with a wrench to make the press frame reciprocate several times, and observe whether there is jamming.
2. Whether the motor and electrical parts are dry and insulated well.
3. Whether the safety protection switches of the honeycomb die-cutting machine are normal and reliable.
4. Lubricating oil should be injected before operation.
5. Check whether the screws and nuts of each part of the honeycomb die-cutting machine are loose. If found, solve them in time.
6. Check whether the honeycomb die cutting machine brakes flexibly during the moving process.
7. After the power is turned on, press the motor start button first, and the machine can be put into operation after the flywheel rotates for a certain period of time.
8. When the distance between the base plate of the honeycomb die cutting machine and the press frame plate needs to be adjusted, the power should be cut off to ensure safety.
9. It is strictly forbidden to grab paper between the base plate of the honeycomb die cutting machine and the plate of the press frame.
First of all, the die-cutting indentation of the honeycomb die-cutting machine and the printing working environment will cause the cardboard fiber to deform or stretch, and it will also make the die-cutting indentation inaccurate. Try to ensure that the die-cutting indentation is consistent with the working environment (ie Have the same temperature, humidity, etc.).
In addition, it should be noted that the cardboard gripping rules of the honeycomb die cutting machine are different. All honeycomb die-cutting machines will produce precision errors. To improve the accuracy of die-cutting and indentation, we must choose a high-precision honeycomb die-cutting machine for operation.
In addition, the honeycomb die-cutting machine is affected by many factors such as the technical level and experience of the plate maker. Therefore, to obtain a good die-cutting accuracy, an advanced plate-making method must be selected; if the paperboard gripper specification error is large, it may be The rear positioning and toggle distance of the honeycomb die-cutting machine is too small, which can be solved by adjusting the rear positioning and increasing the rear positioning toggle distance.
The die-cutting indentation of the honeycomb die-cutting machine is not aligned with the printing position. The solution is to re-calibrate the die-cutting plate according to the product requirements. In addition to correcting the printing and die-cutting indentation positions, you can also adjust the paper conveying side. The positioning rule or the front positioning rule is used to correct, so that the die-cutting indentation is registered with the printing grid.
Finally, the operator of the honeycomb die cutting machine should pay attention to dust and clean. In actual production, a large amount of waste paper edges and paper lint will be generated when die-cutting the carton. If you don’t pay attention, it will enter the chain transmission part, die-cutting part moving platform and some rotating parts, and may block the photoelectric detection head, etc. , Causing the honeycomb die-cutting machine to malfunction. Therefore, the cleaning of the die-cutting machine's body must be the first priority, and then the trouble-free operation of the machine can be ensured.