we installed the machine successfully in indonesia
Published:2016-03-17
we installed the machine successfully in indonesia
Our team arrived at indonesia on 19th Feb,Then we started work at 21th Feb.
During the installation, we overcome the troubles finally we help our customer finish the
installation. Our
honeycomb core machine running very good, we test 15mm 30mm 50mm 100mm
thickness honeycomb core, use different cell sizes like 6mm 12mm 24mm. The honeycomb core
machine performed pretty good in this test. Our customer feel very satisfied with all of this.
thickness honeycomb core, use different cell sizes like 6mm 12mm 24mm. The honeycomb core
machine performed pretty good in this test. Our customer feel very satisfied with all of this.
A few days after, we tested the
honeycomb board machine, use the pva glue which from our
customer. we used core glue, it can save glue save the cost. Also the concentration of the
glue is suitable for our machine. Successfully,the boards were made by
our honeycomb borad
machine are pretty good. The intensity of the board is very good, several people stand on the board
machine are pretty good. The intensity of the board is very good, several people stand on the board
will not be destroyed. And the board looks very beautiful.
The punch machine , slitting machine ,round corner machine all showed very good.
Finally, we spend some days teach the workers how to use the machine by themself. Some
problems occured , but we solved them.
We finished all the work at 8th March. This installation is very successfully, we need to
thanks our team ,
our company and our customer. Our success can not leave the help which
from all of you.
Thanks.